DIY Mannequin Pin Cushion
I came up with the idea to make a DIY mannequin pin cushion for my sewing room. I really thought it was a cute original idea until I saw this terrific pattern and video on the DIYdish. Rather than using the pattern I managed to eek out using a jewelry model I have and that you have seen in previous photos I decided to use the one from DIYdish with a link to that site and proper attribution. So this is not a pattern of my own but it is so cute I thought to share my own tutorial as well as the video posted on the other website. I hope you all give it a try it is easy to make and a terrific pin cushion for your sewing room.
What you will Need:
- 1 fat quarter of fabric
- 1/4″ thick foam board
- Small oval of felt
- 1 candlestick or some other tall base
- 1 button (optional)
- 1 Mini Christmas ornament or cabinet knob
- Hot Glue
Step 1: DIY Mannequin Pin Cushion
Print out the pattern and cut it out of your fat quarter. You should have a front, a back and two sides. Make sure that one of the sides is the reverse of the other.
Step 2: DIY Mannequin Pin Cushion
With right sides together pin the front to the back at the shoulders. Using 1/4″ seam allowance sew from the top of the neck to the top of the shoulder on each side. All seams in this project will use 1/4″ seam allowance.
Step 3: DIY Mannequin Pin Cushion
Pin one side to the front and back alternating between pinning from top to bottom to achieve a nice even curve. Make sure the bottoms line up. Do the next for the other side.Sew the sides to the front and back starting from the bottom hemline area.
Step 4: DIY Mannequin Pin Cushion
Turn right side out. Stuff the pin cushion with the fiberfill so that it is tightly stuffed but there is a little fabric left around the bottom.
Step 5: DIY Mannequin Pin Cushion
Place the foam board oval to the bottom to hold in the stuffing and hot glue the fabric to the oval. Place the oval of felt to cover up the raw edges of the fabric you just hot glued and Hot glue the felt.
Step 6: DIY Mannequin Pin Cushion
Add the finial to the top of the mannequin using hot glue and hot glue the Mannequin to the top of your candlestick or other base.
Step 7: DIY Mannequin Pin Cushion
If you would like to add a brooch to your mannequin, take a length of fabric and sew a running stitch along the length. Pull the running stitch so that the fabric scrunches into a flower shape. Knot the ends and add a button to the center and sew it to your mannequin. You can also add lace or other trim to make your pin cushion your own. Your DIY mannequin pin cushion is now finished.