|

How to Make a Simple Kimono Jacket

How to Make a Simple Kimono

I realize that it is the dead of winter but I am looking forward to spring and summer already.  To that end, I decided that I wanted to make a simple kimono jacket to wear with jeans once the weather gets warmer.  I really wanted this to be a quick and easy project that anyone can do like most of the sewing projects here at Sew Very Crafty.  I searched high and low for an easy and fun kimono project to share and settled on one that I created myself using measurements from one I found on Peabraindiy.com. This project can be completed in about an hour and you will love the results.  I don’t sew a lot of clothes anymore but it is hard to find certain things that I really like and this casual little kimono jacket was one of them.

I came across this lovely floral fabric at Joann’s and knew that it would be perfect for my kimono project.  The fabric is a midweight polyester but you could use something that is lighter weight.  I chose this fabric because I loved the color and pattern and didn’t mind that it was a little heavier than I originally wanted.  Of course you could head to Hobby Lobby or Fabric.com to get exactly what you want for your kimono jacket.  Just keep in mind that you want something that will give you a little drape and is relatively light weight.  This post contains affiliate links that if ou click on them and make a purchase I may receive a small commission at no extra cost to you.  As an Amazon Associate I earn from qualifying purchases.  

What you will Need: How to Make a Simple Kimono Jacket

  • 2 yds of the fabric of your choice
  • Measuring Tape
  • Standard sewing supplies

Step 1:  Measure

You are going to want to take four measurements.  

a. From end to end of sleeve

b. Length of armhole

c. Bottom of the sleeve to the end of the kimono

d. Length of the sleeve from the end to the “body” of the kimono

Picture7

I used the same measurements as Peabraindiy.com as they fit me as well.  

a. 38″

b. 14″

c. 16″

d. 4″

Step 1:  Mark the fabric

Fold the fabric in half widthwise. In other words make sure the selvedges are lined up on both sides of the fabric and the new fold is at the top.  The original fold is down the center of the piece of fabric. Take a Frixion Heat erasable marker that you can get in my Amazon store or another fabric marker and transfer your measurements to the fabric.  I started in the center and measured 19″ on either side of the fold to create the top of the kimono.  From there I measured the sleeves and the body of the kimono as shown. 

Step 2:  Cut out your kimono

Cut out your kimono along the lines you just drew.  You will have a piece that looks like this:

 

Step 3:  Cut out the front of your kimono

Cut the front center of the kimono through the top layer only.  Make sure to leave the back uncut.  

 

Step 4:  Sew the seams

With right sides together and using a 1/2″ seam allowance stitch the side and under arm seams together.  If you have a serger you can serge these seams for a finished look.  If not just press the seams open.  

Step 5:  Stitch the Raw edges

There will be raw edges along the sleeves, front, and bottom.  You can fold those raw edges under by 1/8″ then another 1/8″ and hem them but I prefer to use a rolled hem foot for these tiny hems.  The rolled hem foot really makes this process easy.  It can be a little fidgity if you have never used one before but once you practice a little it is no problem at all.  If you are unfamiliar with how to use a rolled hem foot check out this video.  You could also use a serger to create a serged rolled hem.  

How to make a kimono jacket
Finished Kimono

I hope you enjoyed this simple no pattern kimono project.  If you would like more sewing and crafting projects sign up for our newsletter and receive access to our free printables library.

 

If you have a moment Follow us on instagram.  https://www.instagram.com/sewverycrafty7/

 

WANT MORE?

SIGN UP TO RECEIVE THE LATEST FROM SEW VERY CRAFTY!

We don’t spam! Read our privacy policy for more info.

Similar Posts

8 Comments

  1. I just want to quickly say that I have not yet made this kimono, however, I had to thank you so much for putting this online and for free. I understand why some people have to charge for patterns, but, I am on a restricted budget being a pensioner, so every penny counts. It’s people like you who make my day happier as I get something I have wanted and for free. Your kimono looks lovely and I especially love the fabric. When I make mine I will be sure to send along a picture. Thanks again!!!!!

  2. I did comment once already about asking how to secure the center around the neck.. I cut a piece of triangle (like on a sweatshirt) added a piece of stabilizer Folded in the edges once. Pinned and sewed the top of the triangle all the way around. This helps so that the back of the neck doesn’t rip. Hope you understand what I was trying to ger across. Thanks .

Looking Forward to Reading your Thoughts on this Project

This site uses Akismet to reduce spam. Learn how your comment data is processed.